Skip To Content

News

Brooks Instrument Introduces New Mass Flow Controllers for High-Temperature Environments

March 13, 2024
The Brooks Instrument GF120xHT Series flow module supports high-temperature applications while the remote electronics are mounted at a lower-temperature location.

Brooks Instrument Opens New Manufacturing Site in Malaysia

September 28, 2023
Brooks Instrument opens fourth manufacturing facility, expanding its production and partnership opportunities with key customers in the Asia-Pacific region.

Brooks Instrument Introduces New Coriolis Mass Flow Controllers for Low-Flow, High-Accuracy Applications

September 19, 2023
Brooks Instrument announces third-generation Quantim QMC Coriolis mass flow controller designed to provide high accuracy for very low flows of liquids and gasses for applications such as catalyst research, thin film coating and surface treatments, fiber-optic cable production and semiconductor wafer processing.

Brooks Instrument Adds New Hazardous Area Capabilities to SLAMf Mass Flow Controllers

June 21, 2023
Brooks Instrument adds new hazardous area capabilities to its SLAMf Series of elastomer-sealed thermal mass flow controllers to support rugged operating conditions, such as those found in chemical/petrochemical research facilities and oil and gas pilot plants.

Brooks Instrument Mass Flow Controllers Provide Intelligent Gas Flow Control in New Cytiva Bioreactor

June 08, 2023
Brooks Instrument announces that its SLA Series Biotech mass flow controllers will provide intelligent, precise gas flow control in Cytiva's new bioreactor, the X-platform.

Brooks Instrument Joins Major Biotechnology Consortium Focused on Regenerative Drug Manufacturing

June 01, 2023
Brooks Instrument has joined the Advanced Regenerative Manufacturing Institute's (ARMI) BioFabUSA program where the company will contribute its expertise, product knowledge and experience in helping biotech equipment manufacturers control the flow of critical process materials and gasses to maximize yield when growing tissue.

Brooks Instrument Announces New Certifications Available for Its SLA Series of Mass Flow Controllers

January 12, 2023
Brooks Instrument announces new certifications for its SLA Series and SLA Series Biotech mass flow controllers, making it easier for OEMs and end users to document quality, performance, and material construction traceability requirements.

Brooks Instrument Receives Supplier Excellence Award from Applied Materials

January 05, 2023
Brooks Instrument receives a Supplier Excellence Award from Applied Materials, Inc. This award recognizes Applied's top-performing suppliers for technical and operational excellence in areas such as quality, service, lead time, delivery, cost and responsiveness.

Brooks Instrument Introduces Korean Language Website, Building on Commitment to Local Market

September 13, 2022
Brooks Instrument launches Korean-language website to provide its Asia-Pacific customers with better access to resources, in-depth product info, technical documentation, white papers, service assistance and technical support.

Process Instrumentation Magazine Features Brooks Instrument Mass Flow Controllers for Hazardous Environments in Recent Issue

July 04, 2022
Brooks Instrument SLAMf Series mass flow controller is the next generation MFC for the measurement and control of process gases engineered specifically for rugged and hazardous environments.

Semiconductor Digest Magazine Features Brooks Instrument Mass Flow Control Expertise in Recent Issue

January 01, 2022
The NEW GP200 Series pressure-insensitive, pressure-based mass flow controller (P-MFC) is designed specifically for etch and chemical vapor deposition (CVD) processes in semiconductor manufacturing.

Brooks Instrument to Showcase New Pressure-Based Mass Flow Controller at SEMICON EUROPA 2021

October 26, 2021
Exhibit to feature new GP200 Series pressure-based mass flow controller (P-MFC) and other fluid measurement and control technology for advanced semiconductor processing.

Brooks Instrument Introduces First Fully Pressure-Insensitive Pressure-Based Mass Flow Controller for Etch and CVD Processes in Semiconductor Manufacturing

August 25, 2021
The new GP200 Series improves flow measurement accuracy and repeatability in semiconductor manufacturing over the widest range of operating conditions in the industry.

Brooks Instrument Opens New Manufacturing, Service and Applications Support Center in Korea

July 27, 2021
New location expands Brooks Instrument’s production, service and applications engineering capabilities, providing enhanced support to key customers in the region.

Brooks Instrument Celebrates 75 Years of Innovation in Fluid Measurement and Control

May 25, 2021
Founded in 1946, Brooks Instrument is celebrating 75 years in 2021 as the global leader in advanced flow, pressure and vapor delivery solutions.

Brooks Instrument Makes ISO/IEC 17025 Certification Available on SLA Series Biotech Mass Flow Controllers

April 08, 2021
With the ISO/IEC 17025 accreditation, one of the most important calibration standards, the SLA Series Biotech mass flow controllers can satisfy even more regulatory compliance requirements in bioprocessing and other life science applications.

Brooks Instrument Announces New Exclusive Sales Representative: Vector Controls and Automation Group

March 19, 2021
Brooks Instrument is pleased to announce Vector Controls and Automation Group as its new exclusive sales representative for Oklahoma, Kansas, Missouri, West Arkansas, and the panhandle of Texas.

Brooks Instrument Celebrates 75 Years of Innovation in Fluid Measurement and Control

May 25, 2021
Founded in 1946, Brooks Instrument is celebrating 75 years in 2021 as the global leader in advanced flow, pressure and vapor delivery solutions.

Brooks Instrument Mass Flow Control Technology Featured in Food Engineering Magazine

February 18, 2021
MFCs are used in a variety of food & beverage manufacturing processes to provide a measurable, continuous amount of gas to complete the recipe.

Brooks Instrument Introduces GT1600 Series Glass Tube Variable Area Flowmeters for Process Industries

December 10, 2020
Introducing the GT1600 Series Glass Tube Variable Area Flowmeters

Brooks Instrument Expands Authorized MFC Calibration and Repair Customer Support Network

November 03, 2020
Expansion in southeastern U.S. and Canada gives customers better access, faster turnaround time for authorized services and repair work

Brooks Instrument Adds High-Speed EtherNet/IP™ Capability to SLAMf Series Mass Flow Controllers

September 19, 2019
NEMA 4X/IP66 rating makes SLAMf gas mass flow controllers (MFC) ideal for biotech and food & beverage applications.

Brooks Instrument Unveils Mass Flow Controllers Built Specifically for Biotech Applications

July 29, 2019
SLA Series Biotech MFC designed to reduce bioprocessing complexity and costs

Brooks Instrument Offers Scholarship Second Year in a Row

July 01, 2019
Award granted to students who show potential in engineering, flow or instrumentation

Brooks Instrument Names Eric Pipal as New Vice President and General Manager

March 14, 2019
Eric Pipal has been promoted to Vice President and General Manager at Brooks Instrument

New Pressure-based Mass Flow Controller Featured at CSTIC and SEMICON CHINA 2019

February 19, 2019
Company expert to discuss new GP200 Series pressure-based flow controller (P-MFC) developed for advanced semiconductor processing

Brooks Instrument Adds High-Speed EtherNet/IP™ Interface to SLA5800 Series Mass Flow Controller

January 21, 2019
Industry-leading SLA5800 Series MFC, featuring another high-speed Ethernet-based communication protocol with enhanced diagnostics to improve your process functions

Brooks Instrument Licenses DLI Vaporizer Technology to Ceres Technologies

January 14, 2019
“Ceres’ extensive fluid delivery experience and their broad range of vaporization solutions will continue to expand the market for Brooks Instrument flow control technology,” said Jarek Pisera, Semiconductor Business Unit Manager at Brooks Instrument.

Brooks Instrument Announces New Engineering Scholarship

November 13, 2018
Award recognizes students interested in engineering, flow or instrumentation

ISPE Boston 2018: Brooks Instrument to Present Newly Enhanced Mass Flow Controller Designed for Biotech Applications

August 29, 2018
Booth highlights to include newly enhanced SLA5800 Series Biotech MFC designed to help reduce bioprocessing complexity and costs.

Brooks Instrument Receives Supplier Excellence Award from NAURA Technology Group, Ltd.

November 13, 2017
Semiconductor wafer processing toolmaker recognizes Brooks Instrument for high quality and repeatability in its digital mass flow controller products

SEMICON Europa 2017: New Vaporization Product Enhanced with EtherCAT

November 09, 2017
Leader in Semiconductor Mass Flow to exhibit the industry’s most accurate and reproducible deionized water vapor delivery module, along with its GF100 Series Mass Flow Controller with EtherCAT® to improve semiconductor process yields

SEMICON Taiwan 2017: New Deionized Water Vapor Delivery Module from Brooks Instrument

September 06, 2017
Company to exhibit the industry’s most accurate and reproducible deionized water vapor delivery module, along with its GF100 Series Mass Flow Controller with EtherCAT® to improve semiconductor process yields

SEMICON West 2017: New Deionized Water Vapor Delivery Module from Brooks Instrument

June 28, 2017
Company to exhibit the industry’s most accurate and reproducible deionized water vapor delivery module, along with its GF100 Series Mass Flow Controller with EtherCAT® to improve semiconductor process yields.

Brooks Instrument Names Mohamed Saleem as New Chief Technology Officer

February 14, 2017
Experienced material science, chemical engineering and semiconductor industry veteran to help guide strategic focus and advanced technology development.